Product Details
In The Box
- (1) 1/8 RC8B3.2 Nitro Team 4WD Buggy Kit
- (1) Product Manual
Needed to Complete
- .21 class rear exhaust engine
- Exhaust system: muffler and header joining pack, or muffler spring
- 2 or 3 channel radio/transmitter set with switch – FM/PCM/2.4GHz recommended
- Transmitter batteries
- 4.8-7.4v receiver battery
- Flat style NiMH, OR Flat style LiPo (Reedy LiPo Pro TX/RX 2400mAh 7.4v Flat), OR Flat style LiFe (Reedy LiFe Pro TX/RX 1600MAh 6.6v Flat)
- Model car fuel (20-30% nitro recommended)
- Fuel bottle
- Glow igniter
- Starter box
- 1:8 scale buggy tires
- 1:8 scale buggy wheels
- CA (cyanoacrylate) glue
- Polycarbonate-specific spray paint or polycarbonate-specific bottled paint and airbrush
- Thread-locking compound
- Steering servo
- Throttle servo
- Tools needed: Needle-nose pliers, Hobby knife, Reamer or hole punch for making holes in body, Ride height gauge, Body Scissors, Hex wrenches, Nut drivers, Wire Cutters, Calipers or a Precision Ruler
- Silicone Shock Fluid, Silicone Diff Fluid, Shock Shaft Pliers, 5pc Hex/Nut Driver Tool Set, Dual Turnbuckle Wrench, Tire Adhesive
Features
Product Specifications
| Motor Type | Glow |
| Speed Control | Sold Separately |
| Wheelbase | Varies |
| Ball Bearings | Full set |
| Chassis | Aluminum |
| Completion Level | Kit |
| Drivetrain | 4WD |
| Wheel Hex Size | 17mm |
| Product Width | 11.99 in (304.5mm) |
| Radio | 2-3 channel (sold separately) |
| Differential | Front, rear and center |
| Max Battery Dimensions | 3.3 x 1.8 x 0.65 in (84.5 x 29.8 x 16.5mm) |
| Receiver | Sold Separately |
| Shock Type | Oil-filled, updated shock cap works for bladder or emulsion style shock setups |
| Wheel Type | 1:8 scale buggy wheels (sold separately) |
| Bushing Material | Metal |
| Charger | Required for receiver battery (sold separately) |
| Vehicle Type | Buggy |
| Water-Resistant | Yes |
| Suspension | New arm design features bottom-loaded inserts |
| Battery | 4.8 – 7.4V receiver battery (sold separately) |
| Engine Size | .21 cu in (sold separately) |
| Product Length | 19.13 in (486mm) |
| Power Type | Glow |
| Servos | High-torque steering servo required |
| Body | Clear polycarbonate with IFMAR approved rear wing |
| Scale | 1/8 |































Reviews
There are no reviews yet.